4CES-6Y 6HP Air Cooled Industrial Stable Condensing Unit

To provide you with the most accurate information about refrigeration condensing unit, we require additional details:

1. Cold Room Dimensions:**

   - Please specify the Length, Width, and Height of the cold room in meters.

2. Cold Room Usage Details:**

   - Kindly provide information about the goods to be stored inside the cold room.

   - Specify the desired indoor temperature for the cold room.

3. Industry Voltage:**

   - Please specify the voltage requirements for your industry.

Regarding the Bitzer Condensing Unit, it's great to hear about its optimized design and features. If you can provide the information requested above, we can offer more tailored advice and recommendations for your specific needs.

Customized Services

Technical requirements:

1. The fins are made of aluminum foil with a hole spacing of 25mm, a row spacing of 21.65mm, and a sheet spacing of 2.0mm; When flanging holes, there should be no cracks around them,

There should be no burrs, fragments or other adverse phenomena, and the color of the aluminum foil should be consistent:

2. After the assembly of the fins, there should be no flipping or dirt on them.

3. The connection between the fins and copper pipes must be through expansion, ensuring firmness without any looseness.

4. Winter fiber welding points must be securely welded, free from welding defects such as false soldering and missing soldering.

5. Upon completion of component assembly, it is mandatory to conduct an airtightness test at a pressure of 3.5 ± 0.2MPa. Submerge the unit in water for a minimum of 5 minutes to ensure there are no leaks.

6. The fan must be equipped with an external rotor motor with a blade diameter of 2 * 4D450.

7. Inlet pipe diameter should be 25mm, while the outlet pipe diameter should be 916mm.

FAQ

Contact Us